Radioeinbau ohne Bose

Frank · 2009-02-21T18:44:55+01:00

Hi Ich bin grad dabei nen Radio in meinen "neuen" zu bauen. Das Radio was ich noch hatte ist ein VW Alpha. Die drei vorhandenen Stecker passen auch soweit an das Radio. Nach aufstecken des Antennenkabels geht auch die rote Beleuchtung des Radios an. Allerdings war in dem Fahrzeug wohl etwas anderes verbaut. So liegen ziemlich dicke Kabel unter der rechten Fussmatte und hinten kommen se aus dem Skisack. Boxen mit je 2 kleineren Boxen sind in der Hutablage verbaut. Jeweils rechts und links …

Hi
I'm just building a radio in my new one.

The radio I still had is a VW Alpha. The three existing plugs also fit to the radio. After plugging in the antenna cable, the red lighting of the radio also works.

However, something else was probably installed in the vehicle. So there are pretty thick cables under the right floor mat and back they come out of the ski bag. Boxes with 2 smaller boxes each are installed in the hat rack. Each right and left below the boxes are mounted on the side so transparent boxes. The cables are still on. They are labeled as follows:

Ponocar
Passive crossover system
Crossover Frequency 3,5 KHZ
Cut-off slope 12dB/Oct
2 Way

There are no other amplifiers or the like.

I have the cables behind the radio, there are these 2 Cinch (?) plugs. And then the probably original 4 cables with the following colors:

1. Blue/red
2. Blue/white
3. Brown
4. Brown/grey (white?)

How do I proceed now ?

Frank

Oh, yes. is 3.6 of 09.89 with 202000 km, without bose, working cruise control, headlight cleaning, blue interior equipment with mechanical codiac seats, outside colour white,